Description

The FlySky FS-TH9X 2.4GHz 9CH Upgrade Transmitter with FS-iA10B Receiver is a capable radio control system designed for drones, RC aircraft, helicopters, gliders, cars, boats, and other radio-control models. A transmitter is one of the most important parts of any RC setup, as it wirelessly sends control commands to the receiver installed on the aircraft or vehicle.

This upgraded 9-channel transmitter uses FlySky’s AFHDS technology with a 2.4GHz RF module, offering strong anti-interference performance, low power consumption, and reliable receiver sensitivity. Operating on 2.4GHz helps reduce interference from onboard electronics such as motors, ESCs, servos, and metal-to-metal noise.

With support for advanced transmitter functions such as throttle curves, pitch curves, endpoint adjustment, subtrim, servo reversing, timer, dual rate, exponential, flaperons, V-tail mixing, and elevons, the FS-TH9X is suitable for hobbyists building more advanced RC and drone projects.

How to bind the RX (receiver) to the TX (transmitter):

1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
2. Hold down bind button on transmitter module while turning on the TX
3. The light should go steady now
4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
5. Turn on TX and then turn on plane/heli

Note: 

If you need to connect the transmitter to a Lipo battery, please pay attention to the positive and negative of the interface, and connect the battery to the two pins on the left.

Features: 

1. Transmitter: FS-TH9X Upgrade with FS-RM003 2.4GHz Module
2. Receiver: FS-IA10B
3. Default Mode: Mode-2
4. Input Power: 12V DC (1.5V x 8 AAA Battery)
5. Bidirectional System
6. Frequencies-Hopping
7. Omni-directional High Gain Antenna
8. Low Power Consumption

Specifications: 

FS-TH9X Upgrade Transmitter with FS-RM003 2.4GHz Module:

1. Brand Name: FlySky
2. Item Name: FS-TH9X 2.4G 9CH Upgrade
3. Channels: 9 Channels
4. Model Type: quadcopter, glider, helicopter, airplane, also car or boat
5. RF Range: 2.40-2.48GHz
6. Bandwidth: 500Hz
7. Band: 160
8. RF Power: less than 20DB
9. 2.4G System: AFHDS
10. Modulation: GFSK
11. Code Type: PPM/PCM
12. Sensitivity: 1024
13. LCD Type: 128 x 64 do
14. Low Voltage Warning: yes(less than 9V)
15. DSC Port: yes(3.5mm:output:PPM)
16. Charger Port: yes
17. Size: 180 x 220 x 70 mm
18. Power: 12VDC or 8 x 1.5AA
19. Weight: 670g
20. Mode: Mode 2
21. Control Range: 350-400m

The transmitter functions:

1. Throttle curves
2. Pitch curves
3. Endpoint adjustments
4. Sub trim
5. Swash AFR mixes
6. Servo reversing
7. Timer
8. Dual rate
9. Exponential
10. Flaperons
11. V-Tail mixing
12. Elevons

FS-IA10B Receiver:

1. No. of Channels: 10
2. Model Type: Fixed-Wing/Glider/Helicopter
3. RF Range: 2.4055-2.475GHz
4. RF Channel: 140
5. RF Receiver Sensitivity: -105dBm
6. Bandwidth: 500KHz
7. 2.4GHz System: AFHDS 2A
8. Modulation Type: GFSK
9. Power: 4.0-6.5V DC
10. Antenna Length: 26mm (Dual Antenna)
11. Weight: 17.6g
12. Size: 50.6*34.9*14.9mm
13. i-BUS Port: Yes
14. Data Acquisition Port: Yes
15. Color: Black
16. Certificate: CE0678, FCC

Package Includes: 

• 1 x FlySky FS-TH9X 2.4G 9CH Transmitter (Mode 2)
• 1 x FS-IA10B 2.4GHz Receiver
• 1 x FS-RM003 2.4GHz Module
• 1 x Bind Plug
• 1 x User Manual