Description

The 433MHz 100mW Radio Telemetry Kit is a wireless communication solution designed for UAVs, drones, autonomous vehicles, and robotics applications. Based on the widely adopted 3DR telemetry architecture, the system is fully compatible with Ardupilot and Pixhawk flight controllers and utilizes open-source firmware for flexible integration and configuration.

The V2 design features interchangeable air and ground modules, allowing either radio to operate as the airborne or ground station module. Each module includes both a Micro-USB interface and a DF13 connector for convenient integration with flight controllers and monitoring systems.

Operating on the 433MHz frequency band, the telemetry kit provides a transparent serial data link for transmitting flight information such as GPS position, battery status, system health, waypoints, and other MAVLink telemetry data between the aircraft and ground control station.

Using Frequency Hopping Spread Spectrum (FHSS), adaptive Time Division Multiplexing (TDM), and built-in error correction, the telemetry system maintains stable communication and improved resistance to interference. It can be configured using Mission Planner and APM Planner software and is suitable for a wide range of UAV and wireless serial communication applications.

Features:

• 433MHz telemetry communication system
• Compatible with Pixhawk and APM flight controllers
• MAVLink protocol support
• Transparent serial communication
• Frequency Hopping Spread Spectrum (FHSS)
• Adaptive Time Division Multiplexing (TDM)
• Full-duplex bidirectional communication
• Configurable duty cycle
• Support for LBT and AFA
• Built-in error correction
• Interchangeable air and ground modules
• Micro-USB connectivity
• 6-position DF13 connector
• UART interface
• Open-source firmware support
• Configurable through Mission Planner and APM Planner
• AT command radio configuration
• RT command remote radio configuration
• Adaptive flow control support
• Lightweight and compact design
• RP-SMA antenna connector

Package Includes:

• 1 × 433MHz 100mW Radio Telemetry Kit
• 2 × Telemetry Cables (APM/Pixhawk)
• 2 × 3.5dBi Antennas

Note:

• Product may be supplied with or without a protective case depending on stock availability.
• Cable colors may vary between production batches.
• Compatible with APM and Pixhawk-based flight controllers.